Cold glue Cold Cola 100g

COLD GLUE

Cola Fria is suitable for the removal of large dents caused by parking bumps, vandalism, or transport damage.

Application:
"On first use, cold glue is applied to the previously degreased adapters (e.g. with silicone remover, spirit, or brake cleaner)."

The application temperature should be between 18 and 25 °C. At low temperatures, for example, you can use a hairdryer to warm the surface to be treated or the cold adhesive; you can also knead it until it becomes soft and properly sticks to your hands.

"It is recommended to warm the degreased adapter with a hairdryer before applying the cold glue to the adapter, so that the glue adheres better after cooling."

How is the Cola Fria adhesive system applied?

Cola Fria is ideally used in combination with a pull hammer and adhesive adapters. Instead of hot melt glue, use Cola Fria.

Before application, the surface to be treated should be degreased (e.g. with silicone remover, spirit, or brake cleaner), clean, and dry.

"Afterwards, the adapter is glued to the dent with the cold glue and positioned with pressure and massage-like movements for better adhesion. If you let the cold glue rest on the surface for about 1 - 2 minutes, it adheres even better."

"On repainted or puttied areas, paint can be torn off. Please check beforehand!"