Produktbeschreibung

COLA FRIA COLD GLUE

Cola Fria is suitable for removing large dents caused by parking bumps, vandalism or transport damage.

Application:
When using for the first time, the previously degreased adapter (e.g. with silicone remover, spirit or brake cleaner) Cold glue applied.

The application temperature should be between 18 and 25 C. At low temperatures, you can use a hair dryer to heat the surface to be treated or the cold glue, which you can also knead until it becomes soft and sticks properly to your hands.

It is recommended to heat the degreased adapter with a hair dryer before applying the cold glue to the adapter so that the glue adheres better after cooling.

How is the Cola Fria adhesive system used?

Cola Fria is ideally used in combination with a pull hammer and adhesive adapters. Use Cola Fria instead of hot melt adhesive.

Before use, the surface to be treated should be degreased (e.g. with silicone remover, spirit or brake cleaner), clean and dry.

The adapter is then glued to the dent using cold glue and is then brought into position using pressure and massage-like movements to ensure better adhesion. If the cold glue is left to rest on the surface for about 1 - 2 minutes, it will adhere even better.

Paint can be torn off from repainted or filled areas. Please check beforehand!