Cold glue Cola Fria 100g
Delivery time:
approx. 2-3 working days
Deliveries to non-EU countries may incur additional duties, taxes and fees.
COLA FRIA COLD GLUE
Cola Fria is suitable for removing large dents caused by parking collisions, vandalism or transport damage.
Application:
When used for the first time, cold glue is applied to the previously degreased adapters (e.g. with silicone remover, alcohol or brake cleaner) .
The application temperature should be between 18 and 25 C. At low temperatures you can, for example, use a hairdryer to heat the surface to be treated or the cold glue; you can also knead it until it becomes soft and sticks properly to your hands.
It is recommended to heat the degreased adapter with a hair dryer before applying the cold glue to the adapter so that the glue sticks better after cooling.
How is the Cola Fria adhesive system used?
Cola Fria is ideally used in combination with a pulling hammer and adhesive adapters. Instead of the hot melt glue, use Cola Fria.
Before use, the surface to be treated should be degreased (e.g. with silicone remover, spirit or brake cleaner), clean and dry.
The adapter is then glued to the dent with cold glue and brought into position using pressure and massage-like movements for better adhesion. If you let the cold glue rest on the surface for approx. 1 - 2 minutes, it will stick even better.
Paint can be torn off in areas that have been repainted or filled. Please check beforehand!